MEF EMC-FILTER 1-PHASE 2-STAGE I:1A,2A,3A,4A,6A,10A,16A U:250 VAC/300 VDC snap on

DIN-rail mountable,against symmetrical interferences Attenuation curves on request.

หมวดหมู่ : EMC FILTERS

MEF EMC-FILTER 1-PHASE 2-STAGE I:1A,2A,3A,4A,6A,10A,16A U:250 VAC/300 VDC snap on

Current1A2A3A4A6A10A16A
Art.No.10460104611046210463104641047210466
Weight
0.45 kg0.322 kg0.45 kg0.305 kg0.314 kg0.317 kg 0.349 kg

Technical Data
Operating voltagemax. 250 V AC/300 V DC
Operating frequency50...60 Hz
Consumptionmax. 5 mA (250 V AC)
Overload current18 × (IN t) max. 0.5 ms; 1.5 × (IN t) max. 1 min. (1 × per hour)
Connection cross section0.2...6 mm² single core (AWG 24...9); 0.2...4 mm² multiple core (AWG 24...11)
General data
Climatic category25/085/21 (EN 60068-1)
Test isolation voltage2.7 kV (L - N), 2 s; 2.1 kV (L - L), 2 s (EN 60939-2)
ConnectionScrew connection, touch protected
Mounting methodDIN-rail mountable TH35 (EN 60715)
Dimensions H × W × D107×65×39 mm
Description
Functional descriptionThe single phase 2-stage EMC filters MEF 1/2 are used in the range 0.1...30 MHz to suppress cable carried interference on mains and control cables. The best filter performance is achieved by using short connection wires (suggestion: earth connection < 10


Applicationsymmetrical interferences: units with high repetitions of the switching processes, - switch mode P.S.U.s, - phase angle controller, - supply of universal motors, - behind transformers

Powered by MakeWebEasy.com